Real World Maths Busters

The Maths Behind Everyday Life

The story, the formula and a worked example — see exactly where this maths shows up in the world around you.

Back to all stories
Technology 3 min read

Why your voice sounds clear on some calls and terrible on others

It all comes down to how much signal there is relative to noise — measured in decibels.

Signal-to-noise ratio (SNR) compares the level of the desired signal to the background noise. A higher SNR means clearer audio; a lower one means you’re fighting static.

SNR in decibels

SNR is the power of the signal divided by the power of the noise, usually expressed in decibels. Each 10 dB increase means the signal is 10 times stronger relative to noise.

SNRdB=10log⁡10 ⁣(PsignalPnoise)\text{SNR}_{\text{dB}} = 10 \log_{10}\!\left(\frac{P_{\text{signal}}}{P_{\text{noise}}}\right)

Signal-to-noise ratio in decibels

A clear call vs a noisy one

Say one call has a signal 1,000 times the noise power, and another has signal only 10 times the noise.

SNR comparison

  1. 1

    Clear call

    SNR=10log⁡10(1000)=10×3=30 dB\text{SNR} = 10 \log_{10}(1000) = 10 \times 3 = 30 \text{ dB}
  2. 2

    Noisy call

    SNR=10log⁡10(10)=10×1=10 dB\text{SNR} = 10 \log_{10}(10) = 10 \times 1 = 10 \text{ dB}
  3. 3

    Difference

    30 dB is crystal clear; 10 dB is barely intelligible. That 20 dB gap means the clear call has 100 times better signal-to-noise.

Answer

A 30 dB SNR call has signal 1,000× the noise; a 10 dB call only 10× — that’s why one sounds perfect and the other is a struggle.

The takeaway

SNR explains nearly every "why does this sound bad?" question — from phone calls to headphones to concert recordings.

Back to all stories